I’m ridiculously picky about ski gear. I’ve spent years teaching, testing kit and obsessing over tiny details that probably don’t matter to normal people. Yet somehow, for most of that time, my approach to ski storage was basically to lean everything against a wall and hope it stayed there.
Which, now I think about it, makes absolutely no sense.
Skis slide over. Poles end up on the floor. Edges chew chunks out of the wall. Add a few pairs to the collection and suddenly half the garage is uninhabitable.
So I finally started trying proper ski racks and wall mounts. Some are great. Some are massive, some are needlessly complicated and some are barely better than leaning your skis against the wall. These are the ones I actually use to store my own gear.
Ski Storage Racks at a Glance
If you just want the short version, the Gravity Grabber is what I’d buy for most setups. It’s what I use myself and you can add more mounts as your ski collection grows – which is inevitable.
But if you’ve got a massive family quiver, don’t want to drill into the wall or actually want your skis on display, there are better options below.
| Ski Rack | Capacity | Best For | Storage Style | What I Like |
|---|---|---|---|---|
| Gravity Grabber | 1 pair per mount (add more side-by-side) | Everyday use and easy access | Individual wall mount | Modular, secure and really easy to grab skis from |
| Arkorus Ski Wall Rack | 1 pair | Cheap, simple ski storage | Minimal wall mount | Tiny footprint and very little to it |
| TOCRETOARE Freestanding Rack | Up to 4 pairs | Garages, rentals and anyone avoiding drilling | Freestanding floor rack | No wall mounting and easy to move around |
| StoreYourBoard Heavy Duty | Up to 8 pairs | Families and big ski collections | Multi-ski wall rack | Stores a ridiculous amount of gear in one place |
| StoreYourBoard Minimalist Wood | 1 pair | Displaying a favourite pair of skis | Vertical wood display mount | Keeps the skis flat against the wall and actually shows them off |
| StoreYourBoard Horizontal Ski Rack | Up to 3 pairs + poles | Small collections and horizontal storage | Horizontal ABS wall rack | A practical middle ground without taking over the whole wall |
Ski Storage Racks I Recommend
1. Gravity Grabber Best Ski Rack & Mount
- Secure wall rack for skis, snowboards and more
- Quick install with included hardware
- Keeps edges safe while saving floor space
- Spring-loaded grip adjusts to different gear
- Minimalist look - I think they look great
- Mounts can be stacked side-by-side to make a full ski storage rack
If you’re willing to pay a little extra for storage that actually works, the Gravity Grabber is my pick.
I’d seen them online for years and kept putting off buying them because, ultimately, they’re still just wall mounts. I’ve used plenty of cheaper storage over the years and wasn’t convinced these could really be worth the extra money.
Annoyingly, they are.
I’ve now got several Gravity Grabbers lined up in my garage, holding a mixture of skis and snowboards. That’s probably the biggest reason they’ve become my favourite setup: you’re not tied to a traditional rack with fixed slots.
Each mount works independently, so you can space them around whatever you’re storing. Narrow skis, wider skis, snowboards, kids’ gear. If you buy another pair of skis later, you can just add another Grabber rather than replace the whole rack.
They’re also ridiculously convenient day to day. Push the ski into the jaws and they clamp around it. Pull it towards you and they release. There’s no strap to undo and you don’t have to move another pair of skis out of the way first.
The rubber jaws grip firmly without chewing up the edges. I’ve had skis and boards going in and out of mine for months and haven’t found any damage I’d blame on the mounts. The mechanism does take a fairly firm push when it’s new, but you get used to it quickly.
I also like that the skis sit side-on against the wall. It keeps them individually accessible and takes up surprisingly little space. Line several Gravity Grabbers up and they effectively become a modular ski rack, which is how I’ve ended up using mine.
The downside is price. If you’ve got one old pair of skis that comes out twice a winter, I’d save your money and buy a couple of decent hooks. But if you’ve got several pairs, a mixture of skis and snowboards, or you’re constantly grabbing gear throughout winter, I think the extra cost makes sense.
I’ve gone into installation, durability and how mine have held up over time in my full Gravity Grabber review.
Pros
- Solid build that feels reliable season after season
- Clamps skis securely without chewing up edges
- Easy in and out (once you get the hang of the push)
- Fits wide skis too
- Line up a few for a clean rack setup
Cons
- Costs more than simple hooks
- Feels a bit stiff at first until broken in
- Unnecessary if you only store one old pair in the garage
2. Arkorus Ski Wall Mount Best Budget Ski Rack
If you just want something simple and cheap to get your skis off the floor, the Arkorus mounts do the job.
There isn’t much to them. Each ski sits between two small rubber discs, with the sidecut of the ski resting against them. That makes them much cheaper and lower profile than a proper clamping system like the Gravity Grabber.
Installation is straightforward. You position each pair of mounts to suit the width of your skis, screw them into the wall and you’re basically done. Just take a bit of time measuring before you start drilling, particularly if you’re mounting several pairs next to each other.
They hold surprisingly well too. I found they work best if you lock your ski brakes first so the bindings don’t push the skis away from the wall.
The rubber is very stiff, so once the skis are sitting between the mounts they feel secure rather than precariously balanced. Mine haven’t loosened or cracked after a few months of use.
The trade-off is convenience. You have to lift the skis up and out rather than simply pulling them from the rack, and the little black discs aren’t exactly beautiful when the skis aren’t there.
For a garage or somewhere you’re mostly storing skis between trips, I don’t think either issue matters much. They’re compact, cheap and do exactly what they’re supposed to.
My only other critique… if you change your skis, they’ll sit at different heights depending on the ski width and sidecut. In the worst case, the new skis might not fit the mounts at all unless you unscrew and re-drill them. This happened to me when going from fat skis back to narrow ones. I lost several hard-earned dollars to the swear jar that day.
If you’re constantly taking skis on and off the wall, I’d spend more on the Gravity Grabber. For straightforward ski storage on a budget, these are hard to argue with.
Pros
- Much cheaper than premium ski racks
- Simple design holds skis securely
- Compact and low profile
- Reallt quick to install
- Great for longer-term or off-season storage
Cons
- Less convenient for frequent in-and-out use
- Ski brakes may need securing
- Changing ski width can mean repositioning the mounts
- Black discs look a little odd when the skis aren't there
3. TOCRETOARE Ski Storage Rack Best Freestanding Rack
Not everyone wants to start drilling holes in the garage wall. If that’s you, the TOCRETOARE is the freestanding option I’d look at.
It’s a pretty simple design: a powder-coated steel base with individual slots for up to four pairs of skis (though I did manage to squeeze some additional pairs of kids skis in there). There’s also space for poles, so you can keep most of the family’s ski gear together rather than leaning everything against a wall.
The biggest advantage is obviously that there’s nothing to install permanently. Assemble it, put it where you want it and move it later if you change your setup. That’s particularly useful if you’re renting or just don’t fancy putting eight holes in the wall.
It also works with a much wider range of ski shapes than something like the Arkorus mounts. There’s no sidecut required to hold the ski in place, so very straight skis, kids’ skis and wider skis aren’t an issue in the same way.
The downside is that you’re swapping wall space for floor space. It’s reasonably compact, but four pairs of skis and their bindings still take up a decent chunk of room. And visually, I much prefer having skis mounted individually on the wall.
There’s also nothing actually clamping the skis in place. They’re sitting upright in slots, which is fine for storage, but it’s a fundamentally different setup to the Gravity Grabber.
For a garage, rental property or family ski setup where drilling into the wall isn’t an option, though, this makes a lot of sense. For a garage, rental property or family ski setup where drilling into the wall isn’t an option, this makes a lot of sense. If I had the choice, I’d still put the skis on the wall, but that’s not practical for everyone.
Pros
- No drilling or permanent installation
- Holds four pairs of skis plus poles in one place
- Works with more ski shapes than sidecut-mounted racks
- Easy to move if you change your storage setup
- Good option for rentals or family ski storage
Cons
- Takes up floor space rather than freeing it
- Bulkier than mounting skis individually on the wall
- Skis sit in slots rather than being securely clamped
- I prefer the cleaner look of wall-mounted skis
4. StoreYourBoard Ski Rack Best Heavy-Duty Rack
If you’ve got more than a couple of pairs of skis lying around, the StoreYourBoard is where I’d start looking. It’s a proper heavy-duty wall rack, with enough space for up to eight pairs of skis plus poles.
The whole thing is rated to 200 lb, so weight really isn’t the concern here. Once it’s screwed into studs it feels absolutely solid, with none of the flex you get from some cheaper garage racks.
Each arm can take two pairs of skis. That’s great for cramming a lot of gear into a relatively small section of wall, although there is a trade-off: if the pair you want is right at the back, you’re probably taking the front pair off first.
That’s why I see this more as a family or big-quiver storage rack than something I’d buy for one or two pairs. If you’ve got six pairs of skis, poles and the odd snowboard cluttering up the garage, it makes a lot of sense.
It’s not particularly pretty. This is definitely more garage wall than living-room ski display. But that’s also sort of the point. It’s a big, simple steel rack that gets a ridiculous amount of gear off the floor.
If I had an even larger collection to store in one place, I’d take this over buying eight individual mounts. For a smaller collection that I’m constantly grabbing skis from, I’d still rather have the Gravity Grabber.
Pros
- Holds up to eight pairs of skis (plus poles)
- Rock solid once mounted into studs
- 200 lb capacity is plenty for a big ski collection
- Gets a lot of gear into a relatively small section of wall
- Good option for families and bigger quivers
Cons
- You may need to remove the front pair to reach skis at the back
- Requires solid wall studs for mounting
- More practical than good looking
- Overkill if you only own one or two pairs of skis
5. StoreYourBoard Wood Ski Rack Best Display Rack
Yes, another StoreYourBoard wall rack. They make a ridiculous number of these things, but this one is here for a completely different reason.
The big steel rack above is what I’d buy to get eight pairs of skis off a garage floor. This is what I’d buy if I had one pair I actually wanted to look at.
It’s basically two solid wood brackets that hold the skis horizontally against the wall. There’s no complicated mechanism and not much to go wrong. The wood looks considerably better inside the house than black steel or rubber mounts, particularly if you’re hanging an old pair of skis, something with a great topsheet, or just the pair you’re irrationally attached to.
The slots are 115 mm and 125 mm wide, so there’s enough room for most normal all-mountain skis. Really wide powder skis are where I’d start measuring before ordering rather than assuming they’ll fit.
The obvious downside is that this isn’t particularly efficient storage. You’re dedicating a decent chunk of wall to one pair of skis.
That’s why I wouldn’t buy it for the garage or a growing collection. The Gravity Grabber is more convenient and the big StoreYourBoard rack holds far more gear.
But as an actual ski display rather than somewhere to dump your equipment, this is easily the nicest-looking option here.
Pros
- Looks much better indoors than a typical metal ski rack
- Solid wood construction feels properly finished
- Great for displaying a favourite or vintage pair of skis
- Simple design with very little to go wrong
- Fits most normal all-mountain skis
Cons
- Only stores one pair of skis
- Wide powder skis may not fit the slots
- Uses a lot of wall space for relatively little storage
- I'd choose the Gravity Grabber for everyday use
6. StoreYourBoard Ski Storage Rack Best Horizontal Ski Rack
Okay, last StoreYourBoard. I promise.
They’ve ended up with three spots because they make racks for three quite different jobs. The eight-pair rack is for maximum storage, the wooden one is for displaying a pair of skis, and this is the sensible middle ground.
It holds around three pairs of skis plus poles horizontally against the wall, without taking up anywhere near as much space as the big garage rack. The arms are adjustable too, which is useful if you’re storing a mixture of skis, poles or the occasional snowboard rather than three identical setups.
I actually quite like this format for a normal household. Three pairs is probably closer to what most people need to store, and everything stays easy to grab rather than being packed tightly together.
The downside is that it’s still very obviously a garage rack. It’s plastic, it sticks out from the wall and I wouldn’t exactly mount it above the fireplace.
It’s also not as quick or satisfying to use as individual Gravity Grabbers. But if you’ve got two or three pairs of skis and just want them organized without spending a fortune, this is probably the most sensible conventional rack in the guide.
Pros
- Good size for 2-3 pairs of skis
- Adjustable arms for different gear
- Can store poles and snowboards too
- More compact than a large multi-ski rack
- Good value if you just want practical garage storage
Cons
- Plastic construction feels less substantial than the steel racks
- Definitely looks like garage storage rather than a display rack
- Sticks further out from the wall than individual mounts
- I'd still choose Gravity Grabbers for frequent everyday use
Vagabond Ski Rack Bonus Pick
The Vagabond Racks 2 is worth a mention because it’s completely different from most of the racks here. It’s handmade in the USA from bamboo by a small business, rather than being another lump of black plastic or steel. I was gifted one last year and it’s been a great addition to my office.
It holds one or two pairs horizontally, including wider powder skis, and looks good enough that I wouldn’t think twice about putting it somewhere visible in the house.
It’s obviously not what I’d buy for a massive family quiver, and you pay more for it than a basic utility rack.
But if you only have a couple of pairs and care what the thing on your wall actually looks like, I really like it. Always dope to support a small US business too.
Pros
- Handmade from bamboo in the USA
- I've used mine for the last year and really like it
- Wide slots work with fat powder skis
- Looks good enough to use inside the house
- Stores two pairs without taking over the wall
Cons
- Only holds one or two pairs of skis
- Costs more than a basic utility rack
- Not the right choice for a large family quiver
Choosing a Ski Storage Rack
The best ski rack or wall mount mostly comes down to two things: how many skis you own and where you’re trying to put them.
There’s no point buying an eight-pair monster for two sets of skis, and an individual wall mount quickly gets expensive if you’re trying to store the gear of an entire family.
Here’s what I’d actually think about before buying one.
How Many Skis Are You Storing?
Start with the obvious one, but leave some room for the collection to grow. Ski gear has a habit of multiplying.
For one or two pairs, individual mounts are simple and take up very little space. For a family or a proper ski collection, a larger rack usually makes more sense. Modular mounts sit somewhere in the middle because you can just add another one when another pair of skis mysteriously appears.
Vertical or Horizontal Storage?
Neither is inherently better for your skis. This is really about the shape of the space you have available.
Vertical racks use wall height and generally have a smaller footprint, which works brilliantly in garages and narrower spaces. Horizontal racks need more wall width, but can fit nicely above benches, doors or other storage. They’re also worth considering if you actually want to vaguely display your skis rather than hide them away.
Wall-Mounted or Freestanding?
I’d wall mount wherever possible. It gets the skis completely off the floor and uses space that would otherwise be doing nothing.
Freestanding racks still make loads of sense if you’re renting, don’t want to drill into the wall or regularly move your gear around. Just remember that you’re swapping wall space for floor space.
How Easy Is It to Grab Your Skis?
This matters far more if you ski regularly.
I don’t want to unclip three things, move another pair of skis and perform some sort of garage-based puzzle every time I want my gear. A good rack should let you grab the pair you want without disturbing everything else.
It’s one of the reasons I like individual mounts, but a well-designed multi-ski rack can be just as easy to live with.
Will It Fit Your Skis?
This is particularly worth checking if you’ve got fat powder skis.
Look at the maximum ski width or spacing between the arms/slots rather than assuming everything will fit. Bindings matter too. A rack might technically accommodate the ski itself but leave several pairs of bindings fighting for the same bit of space.
Don’t Wreck Your Edges and Bases
I’m considerably more interested in where the rack contacts the ski than whether the manufacturer describes it as “heavy duty.”
Rubber, padding or smooth contact points are what you want. Bare metal against edges or bases isn’t something I’d choose for expensive skis that are going on and off the rack all winter.
Installation Matters
A rack is only as solid as whatever you’ve attached it to.
For larger wall-mounted systems carrying several pairs of skis, proper fixing is especially important. Follow the manufacturer’s mounting instructions and use fixings appropriate for the wall you’re attaching it to. Also measure the skis with the bindings attached before deciding exactly where everything is going.
Does It Need to Look Good?
In a garage? Probably not.
In your living room underneath a framed picture of Chamonix while you desperately try to convince your partner that skis count as interior decoration? Possibly.
Steel and plastic racks tend to be the practical choice. Wood and bamboo mounts can look considerably better indoors, but you’re often paying partly for the design rather than extra storage capacity.
That’s really it. Capacity, available space and how easily you can get the skis on and off matter far more than most of the features manufacturers throw into the product description.
Final Thoughts
There isn’t really one perfect way to store skis. A big family quiver needs something completely different from one nice pair you want to keep on the wall.
For me, the Gravity Grabber is still the one I’d choose. It’s simple, secure and easy to use, and you can add more mounts if your collection grows. I’ve tried plenty of more elaborate storage systems, but I keep coming back to it.
If you’ve got loads of skis, go for a proper multi-ski rack. If you’re renting, get the freestanding option. Otherwise, I’d start with the Gravity Grabber.
Hope that helps.
Ski Rack & Wall Mount FAQs
No. A good ski wall mount should use rubber, padding or smooth contact points to protect your skis. I would avoid anything that leaves bare metal pressing directly against the edges or bases.
Yes. Vertical storage is completely fine and is often the easiest way to save space. Just make sure the mount holds the skis securely and leaves enough clearance for the bindings and brakes.
No. There's no need to remove your bindings for normal ski storage. Just make sure the rack has enough clearance for the bindings and brakes, particularly if you're storing several pairs close together.
Some can. It depends on the design, width and weight rating of the mount. Adjustable systems tend to be more versatile, but check the manufacturer's specifications before assuming your snowboard will fit.
A ski wall mount usually holds a single pair, while a ski rack normally holds several pairs on one larger frame. Individual mounts are great if you want a modular setup, while a multi-ski rack usually makes more sense for families and bigger collections.
There isn't one perfect height. You want enough clearance to keep the skis off the floor while still being able to lift them on and off the rack comfortably. Measure your longest skis with the bindings attached before drilling anything.
Absolutely. A simple wooden rack or properly mounted heavy-duty hooks can work well. Just make sure it's securely fixed to the wall and add rubber, felt or another soft material anywhere the rack contacts your skis.
Just dropping in to sat thanks. Went with the gravity grabber to replace my old DIY job… massive upgrade. Best ski wall mount I’ve ever used. On the expensive side but has been worth it. thanks again